Mstafa Sarbast

DESIGNATION

NAME

NATIONALITY

Cementing Technical Engineer

Mustafa Sarbast Abdulqader 

Kurdish/Iraqi

April-2022

Present

• Supports the marketing strategy of the service delivery organization.
• Technical and administrative support in tenders related to cementing, CT, stimulation and downhole tools.
• Defines along with Management: sales goal, coordinates specific sales plans for the promotion of existing services

and the introduction of new services, and makes corresponding follow-up effective.

• Coordinates plan and conducts technical seminars for clients.
• group studies, and participates in presentations i.e. DWOP, PWR.
• Makes regular client visits, document them, and follow-up with operations management. 
• Keep abreast of clients plans and problems.
• Analyzing and defining market requirement for new technologies. 
• Assists in Engineers’ training in appropriate areas. Participate actively on mentoring plans assigned by company. 
• Performing job audits on regular basis for key and strategic clients.
• Prepares proposals for submission to clients and negotiates contractual terms with clients and ensure effective

closure of sales cycle as per Job Cycle Responsibility Matrix.

• Ensure the job cycle for the respective jobs is completed.
• Monitors market expectations, requirements, trends, and contributes to collecting market input for research and

engineering planning and budgeting.

• Ensures that Company policies are well understood, accepted and followed by the personnel under his supervision.
• Maintain the technical control over the jobs ongoing at locations at assigned client and also to ensure that

customer satisfaction is met up to the levels of or above acceptance. 

• Educating and training of operations team as and when required to enable them handle customer independently

at location. 

• Forecasting of the WCS additives with a margin of 3 months to run locations efficiently. 
• Assisting in development of company’s relationship programs with local bodies and employees. 

QHSE   (Responsibility, Authority, Accountability including Occupational QHSE)

• Ensuring the risk assessment of job, in technical and operation domains met the actual job conditions and

accordingly documented with client and supervisor at location prior job execution. 

• Conducting HSE, Qaulity and Process audits of ongoing jobs as and when required. 
• Active participation in QHSE (LPT, recognition programs, safety campaigns etc.)
• Review and ensures SQ compliance prior and during the job execution.
• Ensure that job execution is performed in a safe, efficient and professional manner.
• Attend QHSE fundamental training as required by business line and clients.
• Strive for Service Quality and Service Quality Plan implementation.
• Participate in well site job risk analysis and continual improvement programs in the base, to ensure service quality

is up to client satisfaction with zero injury and spills 

• Ensure that all Sprint Policies and standards, all applicable Business Line Services rules and procedures related to

their work are complied with.

• Write recommendations, operation programs, and post job analysis for cementing jobs (Primary Casings, Squeeze, abandonment plugs, Liners, kick off plugs and remedial)
• Redesign cementing jobs according to diagnostics performed on the field.
• Supervise Cementing Technicians on location to ensure proper blending of fluids and data acquisition.
• Provide engineering support to customer and conduct on-location job quality control testing.
• Analyzing CBL/VDL logs after each job .
• Providing Centralization  recommendation to client 
• Overlook lab operations and analyze test results for cement designs.
• Prepare commercial and technical proposals for client.
• Cost control and follow up on invoices until approval confirmed from customer.
• Asset Operation Supervisor for arranging equipment and Job plan executing. 
• Follow up with quality control measures.
• Presenting technical presentations to Clients.
• Support Stimulation and CT Department technically. 
• Follow Up Client HSE Reports and Quality Control
• Worked as engineer incharge for key clients in Kurditan i.e. Gazprom, Rosneft, Genel Energy, WesternZagros, DNO, KAR

• Taken Responsibility For Well Cementing ,Casing and Completion.
• Design Program and Supervising all Cement Jobs Conducts at Kar Fields.
• Casing Design
• Experienced in over all Drilling process.
• Experienced Well Completion (Completion accessory, Setting Packer ,Well head Installation )
• Basic Well Stimulation and Coil tubing 
• Oil Well Fire extinguishing.

• Design all type of Cement Jobs (Primary and remedial Cementing)
• Operating Cement Unit and Pumping all types of Fluids (cement, Mud, brain, water, acid,...)
• Pressure test for equipment and treating Irons.
• Well Stimulation jobs (Acidizing ,..)
• Standalone Supervising primary and remedial cement jobs.
• Ability of running all basis lab tests in cementing lab (TT, UCA FLC, Rheology)
• Using CEMPRO  and CenntraDesign SOFTWARE

• Sampling and testing of crude oil in production facility.
• Quality control of testing procedure
• Handling basic Troubleshooting 
• Calibration and maintenance of lab equipment
• Data analysis and reporting

• Basic First Aid for Oil and Gas Personnel
• Chemical Safety
• Confined Space and Engulfment Awareness for Oil and Gas Personnel
• Driver Safety
• Electrical Safety_NFPA 70E for Oil and Gas Personnel
• Emergency Response
• Fall Protection Awareness
• Fire Fighting 
• Globally Harmonized System (GHS)
• H2S Awareness & Breathing Apparatus Level II
• Hand and Pinch Point Safety
• Hazardous Wase Awareness (RCRA)
• Heat Stress in Oil and Gas Operations
• Lock Out / Tag Out (LOTO)
• Manual Handling Training
• Office Ergonomics
• Permit to Work (PTW)
• Personal Protective Equipment (PPE)
• Rigging Safety for Oil & Gas Operations
• Safety Orientation and Risk Identification and Reporting
• Slipping and Tripping Hazards
• Working from Heights

• Shielding Spacer and Primary Cementing Techniques for High Permeability Fractured Reservoirs-Feb 2023.
• Making Workovers Easy and Cost Effective: Turning Old Ways into New Opportunities – September 2021
• Adaptation of Technologies Making Clean out Operations Environment Friendly and Cost Effective - Converting Failure into Success Using New Type of Fluidic Oscillator – September 2021
• The remedial design for 9-5/8’’ intermediate casing two stage job for a deep gas well in Kurdistan Region, published in IEEE organization and presented in IEEE conference in April, 2017.
• Production of Ethanol from Iraqi Date (Awarded as best project in Annular Engineering exhibition in Engineering faculty, KOYA university May,2012).

FLUENCY IN ORAL AND WRITTEN:
ENGLISH

ARABIC

TURKISH

KURDISH

Fluent

Fluent  

Intermediate

Native

April-2022

Present

• Supports the marketing strategy of the service delivery organization.
• Technical and administrative support in tenders related to cementing, CT, stimulation and downhole tools.
• Defines along with Management: sales goal, coordinates specific sales plans for the promotion of existing services

and the introduction of new services, and makes corresponding follow-up effective.

• Coordinates plan and conducts technical seminars for clients.
• group studies, and participates in presentations i.e. DWOP, PWR.
• Makes regular client visits, document them, and follow-up with operations management. 
• Keep abreast of clients plans and problems.
• Analyzing and defining market requirement for new technologies. 
• Assists in Engineers’ training in appropriate areas. Participate actively on mentoring plans assigned by company. 
• Performing job audits on regular basis for key and strategic clients.
• Prepares proposals for submission to clients and negotiates contractual terms with clients and ensure effective

closure of sales cycle as per Job Cycle Responsibility Matrix.

• Ensure the job cycle for the respective jobs is completed.
• Monitors market expectations, requirements, trends, and contributes to collecting market input for research and

engineering planning and budgeting.

• Ensures that Company policies are well understood, accepted and followed by the personnel under his supervision.
• Maintain the technical control over the jobs ongoing at locations at assigned client and also to ensure that

customer satisfaction is met up to the levels of or above acceptance. 

• Educating and training of operations team as and when required to enable them handle customer independently

at location. 

• Forecasting of the WCS additives with a margin of 3 months to run locations efficiently. 
• Assisting in development of company’s relationship programs with local bodies and employees. 

QHSE   (Responsibility, Authority, Accountability including Occupational QHSE)

• Ensuring the risk assessment of job, in technical and operation domains met the actual job conditions and

accordingly documented with client and supervisor at location prior job execution. 

• Conducting HSE, Qaulity and Process audits of ongoing jobs as and when required. 
• Active participation in QHSE (LPT, recognition programs, safety campaigns etc.)
• Review and ensures SQ compliance prior and during the job execution.
• Ensure that job execution is performed in a safe, efficient and professional manner.
• Attend QHSE fundamental training as required by business line and clients.
• Strive for Service Quality and Service Quality Plan implementation.
• Participate in well site job risk analysis and continual improvement programs in the base, to ensure service quality

is up to client satisfaction with zero injury and spills 

• Ensure that all Sprint Policies and standards, all applicable Business Line Services rules and procedures related to

their work are complied with.

• Write recommendations, operation programs, and post job analysis for cementing jobs (Primary Casings, Squeeze, abandonment plugs, Liners, kick off plugs and remedial)
• Redesign cementing jobs according to diagnostics performed on the field.
• Supervise Cementing Technicians on location to ensure proper blending of fluids and data acquisition.
• Provide engineering support to customer and conduct on-location job quality control testing.
• Analyzing CBL/VDL logs after each job .
• Providing Centralization  recommendation to client 
• Overlook lab operations and analyze test results for cement designs.
• Prepare commercial and technical proposals for client.
• Cost control and follow up on invoices until approval confirmed from customer.
• Asset Operation Supervisor for arranging equipment and Job plan executing. 
• Follow up with quality control measures.
• Presenting technical presentations to Clients.
• Support Stimulation and CT Department technically. 
• Follow Up Client HSE Reports and Quality Control
• Worked as engineer incharge for key clients in Kurditan i.e. Gazprom, Rosneft, Genel Energy, WesternZagros, DNO, KAR

• Taken Responsibility For Well Cementing ,Casing and Completion.
• Design Program and Supervising all Cement Jobs Conducts at Kar Fields.
• Casing Design
• Experienced in over all Drilling process.
• Experienced Well Completion (Completion accessory, Setting Packer ,Well head Installation )
• Basic Well Stimulation and Coil tubing 
• Oil Well Fire extinguishing.

• Design all type of Cement Jobs (Primary and remedial Cementing)
• Operating Cement Unit and Pumping all types of Fluids (cement, Mud, brain, water, acid,...)
• Pressure test for equipment and treating Irons.
• Well Stimulation jobs (Acidizing ,..)
• Standalone Supervising primary and remedial cement jobs.
• Ability of running all basis lab tests in cementing lab (TT, UCA FLC, Rheology)
• Using CEMPRO  and CenntraDesign SOFTWARE

• Sampling and testing of crude oil in production facility.
• Quality control of testing procedure
• Handling basic Troubleshooting 
• Calibration and maintenance of lab equipment
• Data analysis and reporting